How to Fix YVM302 BT Error Code on YouView Box

While using the YouView Box, users have reported signal problems on their TV screens. The problem arose with the error code “YVM30T”. No one wants to experience signal issues when they’re in the mood to relax and watch TV, but issues like this can ruin the experience. The YVM302 BT error code occurs when there is not enough signal.

Content:

• 1 Fix code bt.com/tverrors on YouView Box
  • 1.1 Restart block
  • 1.2 Check if the cables are connected correctly
  • 1.3 Tell-tales
  • 1.4 Retune channels
  • 1.5 Carry out maintenance
  • 1.6 Switch to Internet mode
  • 1.7 Contact FreeView Support
  • 1.8 Final words | bt.com/tverrors
  • 1.9 Frequently Asked Questions
    • 1.9.1 What does YVM302 mean?
    • 1.9.2 How to fix BT Box not receiving over-the-air channels?
    • 1.9.3 Which Aeriel do I need for YouView Box?
    • 1.9.4 Why is my BT YouView not working?
    • 1.9.5 How to improve the signal from the antenna?

Fix code bt.com/tverrors on YouView Box

Nothing to worry about; we have told you the troubleshooting steps to fix YVM302 BT error code on YouView Box.

Reload box

If you encounter this signal issue, you should try restarting your box. To do this, simply press and hold the power button for a few seconds and then release it as soon as the screen turns on. This will restart your box. After that, the problem should no longer occur. However, if you are still experiencing this, then you should move on to the next troubleshooting step in this article.

Check if the cables are connected correctly

Make sure the cables are connected correctly. You are likely to run into signal problems when the Ariel cable is lost and not properly connected. Correctly connect the Ariel cable to the Ariel In/Antenna In port on the box and to the Ariel connector.

Also check for damage to the cable. If the cable is damaged, this can also cause the problem. If the cable is damaged, replace it and check if you are still experiencing the problem or not.

Check Signals

Check if you are getting correct signals or not. If the signals from Ariel are weak, you will continue to receive the YVM302 BT error code. To check signals, follow the steps given below:

• Open the menu on the ViewBox and then go to Settings.
• Here, under Signal & Connection, select Signal Quality and check the signal quality.

If the signal is weak, then reconfigure Ariel. Sometimes you may experience weak signals due to bad weather. In this case, you will have to wait until the weather is clear. If the signals are strong, we recommend that you follow the next step.

Reconfigure channels

Try reconfiguring channels to resolve the issue. Returning channels has helped many users who have problems with the signal. You can reconfigure channels by following the steps given below:

• Go to Settings from the menu.
• Then, under Signal & Connection, select TV Channels.
• Now select Retune Channels.
• This may take some time, so be patient and wait for the process to complete.
• After that, check if you are facing this issue or not.

Perform maintenance

In many cases, the solution to the problem may not be in your hands. This usually happens when the transmitter needs maintenance, which can degrade the quality of the signals. You can check the Freeview website to see if your transmitter is affected or not. If you don’t know your transmitter, you can check it on the Freeview Home Checker page.

Switch to Internet mode

You can switch to internet mode to get channels if you have a box with internet mode enabled. You will need to complete maintenance mode to switch to maintenance mode. Either you can go into service mode or you can reboot the box to switch to internet mode from cable mode.

Contact FreeView Support

You should no longer face the issue after following the above steps. However, you can contact FreeView Support for further assistance if the issue is still not resolved. You can contact the FreeView Advice Line on 03456 50 50 50. Contact them and tell them about your problem. They will help you solve the problem you are facing.

Final words | bt.com/tverrors

Signal problems often arise when using cable television. If you are facing the YVM302 BT error code on the ViewBox, then you have nothing to worry about. In the article above, we have listed some troubleshooting steps to help you resolve this issue.

FAQ

What does YVM302 mean?

YM302 is a signal error that you can get with YouView Box. This error is usually due to an unstable or poor antenna signal that the YouView box is experiencing.

How to fix BT Box not receiving over-the-air channels?

If the BT box does not pick up channels, we recommend that you reconfigure the channels. For this:

1. Go to settings on your mailbox.
2. Select Signal & Connection and then TV Channels.
3. Select Retune Channels to retune channels.

Which Aeriel do I need for YouView Box?

For best results, it is recommended to use a rooftop antenna. However, you can also use attic or indoor antennas.

Why is my BT YouView not working?

If you are having problems with BT YouView, we recommend that you restart your box. This should most likely fix the issue. However, if the problem still occurs, try updating the software.

How can I improve the antenna signal?

If you want to improve antenna reception, we recommend installing the antenna outside; if possible, set it higher. You can install a higher gain TV antenna, pole amplifier and quality cable for best results. Remove all splitters if you have them.