How to Fix Hisense TV Won’t Turn On or Work

Hisense is one of the most popular Chinese electronics companies. From the beginning, Hisense has been the largest TV manufacturer in China and the second largest in the world. However, being such a large company, Hisense TVs have some quirks. One of them is that Hisense TV does not turn on not red, but blue light in 2023.

Recently, many people have reported that their Hisense TVs won’t turn on. The problem can be simple or complex, depending on how it happened. So let’s start our guide and then you can decide the question.

Content:

• 1 Why won’t your Hisense TV turn on?
• 2 Diagnosing your Hisense TV
• 3 How to fix if Hisense TV won’t turn on in 2023
  • 3.1 Check if your TV is on
  • 3.2 Check the power cable and replace it
  • 3.3 Check your remote
  • 3.4 Disabling additional devices
  • 3.5 Reset your Hisense TV remote control
  • 3.6 TV backlight test
  • 3.7 Reset Hisense TV
  • 3.8 Summary

Why won’t your Hisense TV turn on?

There are many reasons why your Hisense TV won’t turn on. First, there may be an electrical problem. Then, a damaged external device may be connected to your Hisense TV, preventing it from turning on.

Electrical noise is a common occurrence with external devices. As non-specialists, we often refer to this as a short circuit. And a short circuit is quite dangerous. This can damage your TV and all household wiring if not properly grounded.

Either way, your TV’s mother may be dead. Although not common nowadays, it can still happen with rough use or humidity. Unlike Samsung TVs, the Hisense TV is completely dependent on the remote control; your removed batteries may be from juice. Last but not least, some kid in your house may have turned on the timer using parental controls, which is why the Hisense TV won’t turn on.

Diagnosing Your Hisense TV

If your Hisense TV won’t turn on, here are some common troubleshooting steps you can follow to understand what’s wrong and start troubleshooting.

1. If the red light blinks when you turn on the Hisense TV, the power board is bad. Remember, blinking means blinking. If the flashing continues, the power board is damaged. You need to immediately contact the service center.
2. Now, if you are trying to turn on the TV, but when you press the remote, the red light does not turn on, this means that your remote is not working.
3. If you press the hardware power key but the red light doesn’t flash, the problem is with your motherboard.
4. If the power suddenly goes out while you are watching TV and your Hisense TV does not turn on, then one capacitor swelled up.

If you think that nothing like this has happened to you, you can start with our troubleshooting guide and try to solve your problem.

How to fix if Hisense TV won’t turn on in 2023

Here we have listed six fixes that will surely solve the problem of your Hisense TV not turning on. However, if the problem is related to the motherboard, we recommend that you contact the service centers and fix it. Also, keep an eye on each fix as it’s mentioned and don’t skip it.

Check if your TV is on

As silly as it sounds, many people don’t have the right switches at home and turn on their TV directly thinking it’s on. It is possible that your TV is actually turned off, but you are trying to turn it on, but as a result, the Hisense TV does not turn on.

We suggest you first check if the TV is on or not. If not, properly plug the cable into a properly grounded outlet and try again. Everything is getting smarter, and so are TVs. Make sure you are using the correct electrical outlet to connect your TV.

Check the power cable and replace it

The problem may be either in the power cable or in the connecting socket. Your electrical outlet may be having problems. Try using a different outlet to see if your Hisense TV turns on. If not, you can also replace the power cable and then check.

If you bought the TV outside of your country and shipped it, check the voltage rating. In the United States, all electrical appliances run on 110V, while in other countries they run on 220V. In this case, you may need an AC converter to use the TV and your TV is OK.

Check your remote

Many of us won’t notice it, but these days remote batteries are draining faster than ever due to higher range infrared radiation. As a result, if your remote batteries run out of power, it’s wise to replace them as soon as possible. Sometimes people spank TV remotes thinking it will work.

And oddly enough, sometimes it works. But this is not the best choice because it can damage internal organs. So, check your batteries and replace them if they are low and then check if your Hisense TV turns on.

Disable additional devices

TVs are not alone these days. Especially if you have a high quality TV like Hisense, it is never alone. We connect PlayStation, Xbox or any other game console, Hard drives, Flash drives and more.

Perhaps a device is interfering with the internal electronics and causing the TV to not turn on. So turn off every extra item paired with your TV and try turning it back on. He must turn on. If not, follow the next fix.

Resetting Your Hisense TV Remote Control

Hisense TV remotes are no-frills remotes with features not known to many owners. One of them is resetting the remote. Reset is essentially turning the TV remote off and on.

Currently, remote controls have the same capabilities as other control devices, and a small amount of carbon footprint or electrical residue can prevent connection. Here are a few steps you need to follow to reset your TV remote:

1. Pick up the remote control and remove the batteries.
2. Press and hold the power button on the remote for 30 seconds.
3. Now put the batteries back in and make sure their polarity is correct.
4. Now try to turn on the TV.

Your Hisense TV should turn on. Unfortunately, if it doesn’t turn on, follow the next fix.

Check TV backlight

Under the screen of each Hisense TV there is a red LED backlight. Check if it’s enabled. An LED indicator at the bottom of the display means everything is working on your TV.

If not, try plugging and replugging and replacing the cord. If the LED backlight still does not turn on, it’s time to visit the service centers. However, if the lights are on but the Hisense TV won’t turn on, follow the next fix.

Reset your Hisense TV

Sometimes children or elderly people use the remote control in a strange way, which may disturb the internal settings. For example, they may have set a timer in parental controls that prevents you from turning on the TV. So you may need to either wait 12 hours because that’s the timer’s maximum limit, or follow these steps to reset your TV:

• First, disconnect all connected devices and the power cable from the TV.
• Now, depending on your TV model, locate the power button. It should be somewhere under the screen and next to the backlight.
• Press and hold the power button for about 30 seconds. This will remove all residual power from the TV.
• Once you do this, do nothing, just wait 30 minutes straight.
• Then plug in the power cable, make sure everything else is off, and turn on the TV.
• Some newer Hisense TVs have a dedicated reset button on the back. If you have it, it should look like a tiny hole. You need to insert a pin and press it.

It should turn on now. If not, now is the time to contact the service centers. We do not recommend that you open the back cover of your TV because Hisense TVs often come with a 2 year warranty. An additional extended warranty may also apply, depending on your retailer. In addition, if you open the TV, it will be difficult for you to connect it back because of the nooks and crannies.

essence

Well, that’s all we have on how you can fix if your Hisense TV won’t turn on. We hope this guide has helped you. We want to tell you that all TV problems are either related to the capacitors or the motherboard. And in case the above fixes didn’t help, it’s possible that one of them got corrupted. In this case, it is better to visit service centers once.