How to fix Toshiba Fire TV Remote not working issue

Replacing a damaged or lost Fire TV remote is a simple and straightforward process. Your existing Fire TV or Insignia will quickly pair with the Fire TV app. And it supports the full voice control functionality of your original remote control using both Bluetooth and IR technology. However, he also experiences some problems.

It has been reported that many users are experiencing problems using the Toshiba Fire TV remote control. And they can’t stream content. If you are also facing this problem, you can find out why your Toshiba Fire TV remote is not working by viewing the guide below.

Fix Toshiba Fire TV Remote Not Working Issue

The Toshiba Fire TV remote does not work for various reasons. The most common cause is a TV malfunction. Also, your Toshiba Fire TV remote control may be stuck due to a faulty button.

So, to fix your Toshiba Fire TV remote not working issue, follow these troubleshooting steps:

Power and cycle remote control

• Remove the batteries from the remote. Then press and hold the power button on the remote for 60 seconds.
• Press all buttons on the remote several times after the full minute has elapsed. Replace batteries now. Check it out again.
• To drain the remaining power from the remote control, you need to press the power button.

Because there are still capacitors in the remote that retain some electricity even when the batteries are removed. So it won’t reset completely unless the capacitors are discharged.

When the power button is held down, the remote’s capacitor discharges. Therefore, as simple as it may seem, this is a very important step.

You may also find it a little strange at first. The Toshiba Fire TV remote can work again if you press all of its buttons at the same time.

Buttons often stick on remotes. You will not be able to control other buttons on the remote control if one or more of the buttons is stuck.

It is also possible that the remote control button is stuck differently. The elastic could get stuck under the elastic because it got between the sofa cushions.

But no matter how you look at it, this is a fairly common problem that is easy to fix.

You must break all the buttons and hit the palm of your hand with the remote control several times. And the buttons pop back up.

Point the buttons down when flipping it. Let the dirt fall out of the back, slapping it. Don’t worry about damaging the remote because the Toshiba Fire TV remote is very durable.

If none of this worked, try leaving the batteries in the remote this time. Keep pressing and holding the power button for 60 seconds.

You can most likely fix your remote by doing this simple reset.

Factory Reset Your Fire TV Remote

Alternatively, you can try resetting the remote to factory settings to fix the issue.

If you don’t know what a factory reset does, it essentially erases all the settings stored on your remote.

Instead, we will restore all deleted settings to their factory defaults. Press and hold the left DPAD “left”, “back”and “menu”buttons for about 10 seconds to successfully restore the factory settings of the remote control.

Try connecting the remote again

You may have connected your remote incorrectly, which explains the problem you’re experiencing. You can resolve this issue by repeating the pairing process.

To pair the remote, press and hold the Home key. It can be found on the remote in about ten seconds.

Your remote control should attempt to pair automatically as soon as you keep the button pressed.

If the remote does not connect, you may need to turn off the TV and remote for a while before trying again.

Replace batteries

Battery power is the main source of power for the remote control, so prolonged use may drain the battery. In addition, there is a possibility that your remote’s batteries are not inserted correctly.

In this case, the remote will stop working automatically. Therefore, it is recommended to replace the batteries in the remote control with a new set of batteries.

Make sure the IR sensor on the remote control is working

The infrared beam is used by your TV and remote control to send and receive signals. And it can directly cause your remote to not work if that beam is not working properly.

An easy way to check if your remote’s IR is working is to use the camera on your phone:

• Go to your phone’s camera app. Look through the screen on the remote.
• Press any button on the remote control.
• Each time you press the button of the operating remote control, a red light will flash on the camera screen.
• The remote may be faulty or the batteries are dead if you don’t see the red light.

Upgrade your TV

Make sure your TV’s firmware is up to date. An outdated version may result in slow device performance.

And this can lead to the fact that both the device and the remote will not work.

Remove Obstacles

A common problem is a blockage between your remote and TV. Remote controls and televisions, since they use infrared beams, must be able to send and receive this beam without obstruction.

A wall, other electronic signals such as Bluetooth, or large objects such as furniture or speakers may be obstructions.

So, try moving your Toshiba Fire TV remote to a different location if you notice a blockage between it and your TV.

You can also point the remote directly at the TV’s sensor. Simply changing the seat you’re sitting in or moving decorative furniture can solve the problem.

Contacting Support

You should definitely contact the support service if you still have not been able to solve the problem. Your case will be reviewed by a support agent.

Final words

If you’ve tried all the above methods, but your Toshiba Fire TV remote still doesn’t work, your last option is to replace the remote if you’re still unable to fix it. Sometimes it is possible that the remote is beyond repair. And there’s nothing you can do about it if that’s the case.