How to Fix Yellow Light on Verizon Fios Router

Routers have LEDs that show the status of your internet connection. The Verizon router has different color indicators: white, blue, green, red, and yellow, each with a specific meaning. White light indicates that everything is working fine with the router, blue light indicates pairing, green indicates no traffic, and red indicates a problem, but what does the yellow light mean?

A solid yellow light means no Internet connection, while a flashing yellow light indicates a good connection between your router and the extender. The blinking rate of the yellow indicator shows how strong the connection is.

Content:

• 1 Fix Yellow Light on Verizon Fios Router
  • 1.1 Restart your router
  • 1.2 Connect the Ethernet cable correctly
  • 1.3 Avoid Overheating Your Router
  • 1.4 Move the extender closer to the router
  • 1.5 Reset the router
  • 1.6 Contact your service provider
  • 1.7 Conclusion

Fix Yellow Light on Verizon Fios Router

If you are experiencing a yellow light on your Verizon router and want to fix it, this article will help you.

Restart your router

The very first thing you can do is reboot your router. This will fix any technical errors along the route and the Verizon Router yellow light issue. To reboot your router, follow these steps:

• Turn off your router first. If your router has a backup battery, turn that off as well.
• Also unplug the router from the outlet.
• Now wait a minute or two before continuing.
• After waiting for a while, plug the power cord into a power outlet and turn on the router.
• Check if the yellow light problem persists or not.

Connect the Ethernet cable correctly

Another thing you need to make sure is that the Ethernet cable is properly connected to the router. You will find the Ethernet cable on the back of the router. You can try unplugging the ethernet cable and then plugging it back in, making sure it’s properly connected to the router.

Also check the cable for damage. If your ethernet cable is damaged, this can cause this problem. Check for signs of wear on the cable. If the cable is damaged, it will have to be replaced.

If the problem was due to a damaged or loose cable, this should fix it. However, if you are still facing the Verizon Router yellow light issue, then you should proceed to the next troubleshooting step in this article.

Avoid Overheating Your Router

If you’re experiencing Verizon router yellow light issue, it could be because your router is overheating. This usually happens when your router is on for hours and you don’t even turn it off for a minute. Also, if the router is not properly ventilated, it can cause it to overheat.

If you have been using the router for a long time, then turn it off for a few minutes and let it cool down. You can turn it on some time after the temperature drops.

Also, make sure you provide adequate ventilation for your router. Keep it open with proper airflow so it doesn’t overheat.

Move the extender closer to the router

If you see a yellow blinking light on your Verizon router, this indicates a good connection between your router and the extender. A faster flash indicates a good connection, while a slower flash indicates a weak connection. The only solution to the blinking amber problem is to move the extender closer to the router. This will strengthen the connection between your router and the repeater and solve the problem.

Reset router

When you reset your router, it will return to factory settings. This will remove any changes made to the router and fix any bugs that might be causing the yellow light issue. You can reset your router by doing the following:

• Find the Reset button on your Verizon router. You will usually find this at the back.
• Insert a pin into the hole and press the button for 20 seconds.

• Your router will reboot and the problem should be gone.

Contact your service provider

The yellow light issue occurs due to poor internet connection. You can contact your service provider if your Verizon router is still amber. You may often encounter a yellow light on a Verizon router when the network is undergoing maintenance; your service provider regarding the same. If there is something wrong with your connection, they will fix it, or if there is any maintenance work going on, they will let you know when you can expect to connect again.

Conclusion

Each LED color on the router indicates the connection status on your router. A yellow light on a Verizon router means something is wrong with your internet. If your Verizon router has a yellow light on, the steps above should help you fix it.